Avago-technologies Cache Protection for RAID Controller Cards Manuale Utente Scaricare il pdf (Pagina 30)

Avago Technologies

- 30 -

Cache Backup Products for MegaRAID SAS+SATA RAID Controllers User Guide

May 2015

Chapter 2: Installing the Cache Backup Products

Installing the LSIiBBU06 Unit

2.3.2.3 Reinstalling the RAID Controller on the Motherboard

Follow these steps to reinstall the RAID controller on the motherboard.

1. With the power to the chassis still turned off, and the power cords unplugged, make sure that the chassis is

grounded and has no AC power.

2. Install the RAID controller into a PCIe slot on the motherboard, as shown in the following figure.

3. Press down gently, but firmly, to seat the card correctly in the slot.

The bottom edge of the RAID controller must be flush with the slot.

CAUTION Never apply pressure to the LSIiBBU06 unit when you insert the RAID

controller. Instead, press down only on the top edge of the RAID

controller, as shown in the following figure.

NOTE This controller is a PCIe x8 card, and it can operate in x8 or x16 slots.

Some PCIe slots, however, support only PCIe graphics cards; if a

controller is installed in one of these slots, the controller will not

function. Refer to the guide for your motherboard for information

about the PCIe slot.

Figure 15 Reinstalling the MegaRAID SAS 8708EM2 RAID Controller

4. Secure the RAID controller to the computer chassis with the bracket screw.

5. Attach the cables from the internal port connectors to the drives.

6. Reinstall the computer cover, and reattach the power cords.

7. Turn on the power to the computer.

85024-02

Edge of Motherboard

Edge of

Motherboard

Bracket Screw

Press Here

LSIiBBU06 (Top V iew)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 138 139

Nessun commento

Avago-technologies Cache Protection for RAID Controller Cards Manuale Utente Pagina 30